Poultry Manager Get the app
Sensor layer

The farm should tell you, not the other way round.

Weight, level, flow and temperature arrive on their own and land in the same reports your supervisors already read.

Silo 3 12480 kg
Trolley 2 186 kg
Water 1.8 L/m
Shed temp 28.4 °C
01

Silo weight

Load cells report continuously, so feed on hand is a measurement instead of an estimate scribbled at the end of the week.

  • Live weight and cover

    Reading 12480 kg right now, with fill percentage and days of cover per silo.

  • Consumption by day

    Daily draw-down attributed to the sheds that were fed from it.

  • Checked against what you bought

    Silo movement reconciled with purchase inwards so shortfalls surface early.

02

Feed trolley

Weighing happens where the feed is actually delivered, which is the only place the number means anything.

  • Load on the move

    Currently 186 kg, captured per trip rather than per day.

  • Straight into feed issues

    Each trip becomes a running feed entry against the flock and unit it served.

03

Water

Consumption falls before anything else does, which makes the water line the cheapest early warning you can install.

Tank level
Ultrasonic measurement calibrated per tank shape.
Flow
Litres per minute against the band expected for that age.
Alerts
Low level and sudden drop notifications.
History
Trend across the cycle, not just today.
04

Climate

Temperature sits on the same fabric as feed and water, so a bad night reads across all three together.

  • Shed temperature

    Reading 28.4 °C with per-shed history and thresholds.

  • Paired with the water line

    Flow at 1.8 L/m read alongside climate for the same house.

  • Placement that matches your units

    Sensors mapped to sheds and units so readings roll into flock reporting.

05

Gateways and provisioning

Devices are managed inside the app, so adding a sensor does not mean calling anyone.

Registry

Every gateway and controller listed per farm.

Nodes

Enable, disable and reassign without a site visit.

Calibration

Type, unit and range set per sensor.

WiFi setup

Controllers onboarded from the phone in your hand.

Health

Last seen, latency and signal at a glance.

Mapping

Bound to farm, unit and shed so data lands correctly.

06

What it turns into

A dial nobody reads is decoration. These readings end up in documents people act on.

  1. Silo boardEvery silo and its cover on one screen.
  2. Daily consumptionBy day, shed and feed type.
  3. Purchase reconciliationDelivered against consumed, with the gap named.
  4. Cycle trendsWater and climate history beside performance figures.

Wire up one silo and see the difference by Friday.

A single instrumented silo usually pays for the conversation about instrumenting the rest.

Get the app See every module